8
SE45010UMC.0306
How to disassemble and reassemble the clamp
To remove the clamp;
To install the clamp;
(1) Push in.
(1) Pull down.
(2) Pull down.
(2) Push in.
(3) Release it.
(3) Push up.
(4) Release it.
Cleaning procedure
(1) Turn the power switch off.
(2) Remove the RF cable from the units.
(3) Remove the head protector.
(4) Remove the clamp.
(5) Clean the clamp, the head protector and sealing head area thoroughly. If you have
used water, detergent or decontamination liquid, wait a few minutes to allow for
thorough drying.
(6) Assemble the clamp and the head protector.
(7) Connect the RF cable between units.
(8) Turn the power switch on and test the machine.