CDS COOLED Z6 USER GUIDE
5.
Drop-In Filter system of CM2C/ CM2N does not have the lens communication electric contact points
so the auto focus, lens information recording and pulse signal transfer for motor operation which are
based on the communication between the camera body and the lens are disabled even when a
Camera lens is used.
6.
In case of Drop-In Filter system of CM2C/ CM2N you always have to focus lenses manually. Some
lenses need power from the body for manual focusing and you cannot focus these lenses even
manually when they are mounted on Astro Z6.
7.
Electric View Finder is alive as before modification.
8.
In mechanical shutter mode, Shutter speed control of CDS Cooled Z6 is not valid in sub-second
exposure, only valid in Bulb Shutter mode. But in [Silent photography] mode ON, you can take photo
in all shutter speed.
Safety of the User and the Camera
Follow these safeguards and use the equipment properly to prevent injury and
equipment damage.
1.
Do not leave the power adapter and the power cord near an object emitting heat. This can cause
fire due to deformation and damage of the insulator.
2.
Do not use the camera near inflammable gas.
3.
If the internal parts of the camera are exposed after the camera is dropped or the camera housing is
damaged, do not connect the power to the camera due to danger of an electric shock.
4.
Do not disassemble the camera. It can cause an electric shock.
5.
Keep the camera from the reach of small children.
6.
Do not use the equipment in dusty or humid places. This is to prevent fire and electrical shock.
7.
Do not use the camera with medical equipments. The electromagnetic interference can cause
malfunction of the medical equipments.
8.
To prevent fire and electrical shock, follow the safeguards below:
•
Always insert the power plug all the way in.
•
Do not handle a power plug with wet hands.
•
Do not excessively bend the cord.
•
Do not put a heavy object on the power adapter and cord.
•
Do not connect too many power plugs to the same power outlet.
•
Do not use a cord whose insulation has been damaged.
•
If the surrounding near the power outlet is dusty or humid, the power outlet can be short
circuited. Clean and dry the surrounding before using the equipment.
•
Do not use the camera inside a car under the hot sun, under the direct sun light or near a heat
source. The camera can be damaged or causes skin burns.
•
Do not use paint thinner, benzene, acetone or other organic solvents to clean the equipment.
Doing so may cause fire or a health hazard.
PAGE /
CENTRALDS
9 11
