Page 7
SKU 96573
For technical questions, please call 1-800-444-3353.
8.
Allow the motor to reach its full speed before starting to sand.
9.
Turn the Regulator Knob (31) to adjust the oscillation speed. The closer the
Regulator Knob is to “MAX” the faster the Pad will move.
10.
Always keep a safe distance from the sanding pad while the Sander is operating.
Do not apply pressure. If the Pad slows down as the material is being worked;
pressure is being applied. Allow the Sander to do the job.
11.
Always keep your body and clothing a safe distance from the running Sander.
12.
Always maintain a good grip with both hands when operating this tool.
13.
After the Sander has been turned off, continue to hold onto the tool with both
hands until the Pad stops completely; then set the tool down.
14.
Disconnect Sander from compressor when finished.
15.
Clean, then store the product indoors out of children’s reach.
Maintenance and servicing
damaged products can fail, causing personal injury. do
not use a damaged product. if abnormal noise or vibration
occurs, have the problem corrected before further use.
cleaning, maintenance, and lubrication
1.
beFore eacH use,
inspect the general condition of the product. Check for
loose screws, misalignment or binding of moving parts, cracked or broken parts
and any other condition that may affect its safe operation.
2.
aFter use,
clean external surfaces of the product with clean, moist cloth.
caution
