background image

Page 3

SKU 96573

For technical questions, please call 1-800-444-3353.

 Warning!  read all instructions

 

Failure to follow all instructions listed below may result in serious injury.

SAVE THESE INSTRUCTIONS

Work area saFety

1. 

keep children and bystanders away while operating.  distractions can 

cause you to lose control.

2. 

Keep work area clean and well lit.  Cluttered or dark areas invite accidents.

personal saFety

1. 

Wear ansi-approved safety goggles, niosH-approved dust mask/

respirator, and heavy-duty work gloves during use and service.

2. 

Stay alert and use common sense when operating.  Do not use when tired or 

under the influence of drugs, alcohol or medication.

3. 

Do not overreach.  Keep proper footing and balance at all times.  This enables 

better control in unexpected situations.

4. 

Dress properly.  Do not wear loose clothing or jewelry.  Keep your hair, clothing 

and gloves away from moving parts.  Loose clothes, jewelry or long hair can be 

caught in moving parts.

product use and care

1. 

this product is not a toy.  keep it out of reach of children.

2. 

Use the correct product for your application.  The correct product will do the job 

better and safer at the rate for which it was designed.  Do not modify this product 

or use it for a purpose for which it is not intended.

3. 

Check for misalignment or binding of moving parts, breakage of parts and any 

other condition that may affect the product’s operation.  If damaged, have the 

product repaired before use.

4. 

Use the product and accessories etc., in accordance with these instructions and 

in the manner intended for the particular type of product, taking into account 

the working conditions and the work to be performed.  Use of the product for 

operations different from those intended could result in a hazardous situation.

Summary of Contents for 96573











Reviews: