Central Pneumatic 96314 Assembly And Operation Instructions Manual Download Page 10

Page 10

SKU 96314

for technical questions, please call 1-800-444-3353.

liMited 1 yeAr wArrAnty

Harbor Freight Tools Co. makes every effort to assure that its products meet high 

quality and durability standards, and warrants to the original purchaser that this product is 
free from defects in materials and workmanship for the period of one year from the date of 
purchase (90 days if used by a professional contractor or if used as rental equipment). This 
warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence 
or accidents, repairs or alterations outside our facilities, normal wear and tear, or to lack 
of maintenance. We shall in no event be liable for death, injuries to persons or property, or 
for incidental, contingent, special or consequential damages arising from the use of our 
product. Some states do not allow the exclusion or limitation of incidental or consequential 
damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS 
EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUD-
ING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with 

transportation charges prepaid. Proof of purchase date and an explanation of the com-
plaint must accompany the merchandise. If our inspection verifies the defect, we will either 
repair or replace the product at our election or we may elect to refund the purchase price 
if we cannot readily and quickly provide you with a replacement. We will return repaired 
products at our expense, but if we determine there is no defect, or that the defect resulted 
from causes not within the scope of our warranty, then you must bear the cost of returning 
the product.

This warranty gives you specific legal rights and you may also have other rights 

which vary from state to state.

3491 Mission Oaks Blvd.  •  PO Box 6009  •  Camarillo, CA 93011  •  (800) 444-3353

pleASe reAd tHe following cArefully

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROvIDED THE PARTS LIST AND ASSEM-

BLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER 
OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER 
THAT HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR 
SHE IS qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.  IN FACT, THE MANUFACTURER 
AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS 
SHOULD  BE  UNDERTAKEN  BY  CERTIFIED  AND  LICENSED TECHNICIANS,  AND  NOT  BY THE 
BUYER.  THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS 
TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS 
OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Summary of Contents for 96314













Reviews: