Page 5
For technical questions, please call 1-888-866-5797.
Item 95810
NOTICE
Clean the Spray Gun IMMEDIATELY after use.
Delayed or inadequate cleaning will permanently clog the Spray Gun.
S
AFETY
Op
E
r
A
TION
M
AINTENANCE
S
ET
up
Specific Safety Instructions
1.
Do not direct spray at people or animals.
2. Do not exceed maximum air pressure.
3. Do not spray near open flames, pilot lights,
stoves, heaters, the air compressor, or
any other heat source. Most solvents
and coatings are highly flammable,
particularly when sprayed. Maintain
a distance of at least 25 feet from the
air compressor. If possible, locate the
air compressor in a separate room.
4. Read all of the information concerning
coating products and cleaning solvents.
Do not use chlorinated solvents
(e.g. 1-1-1 trichloroethylene and
dichloromethane, also known as
methylene chloride) to clean Airbrushes.
Many Airbrushes contain aluminum,
which reacts strongly to chlorinated
solvents.
Contact the solvent or coating
manufacturer as needed regarding
potential chemical reactions.
5. Industrial applications must
follow OSHA requirements.
6. Spraying hazardous materials may
result in serious injury or death.
Do not spray pesticide, acid, corrosive
material, fertilizer, or toxic chemicals.
7. Paints and solvents may be harmful or fatal if
swallowed or inhaled. Avoid prolonged skin
contact with solvents or paints as they will
irritate skin. After any contact, immediately
wash off exposed area with hot, soapy water.
8. Attach all accessories properly to the
tool before connecting the air supply.
A loose accessory may detach
or break during operation.
9. Install an in-line shutoff valve
to allow immediate control over
the air supply in an emergency,
even if a hose is ruptured.
SPECIFICATIONS
Maximum Air Pressure
30 PSI
Air Inlet
1/8" - 27 NPS
Paint Capacity
.74 fl. oz.
