background image

SKU 90749

For technical questions, please call 1-800-444-3353.

Page 2

PRODUCT SPECIFICATIONS

SAVE THIS  MANUAL

You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual.  Write the invoice number on the inside of the
front cover.  Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY WARNINGS AND PRECAUTIONS

1.

KEEP WORK AREA CLEAN AND DRY.  Cluttered, damp, or wet work areas
invite injuries.

2.

KEEP CHILDREN AWAY FROM WORK AREA.  Do not allow children to handle
this product.

3.

STORE IDLE EQUIPMENT.  When not in use, tools and equipment should be
stored in a dry location to inhibit rust.  Always lock up tools and equipment, and
keep out of reach of children.

4.

DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS.  
Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs.  If there is any doubt, do not attempt to
use this product.

Item Description 

Air Tank Capacity 

8 Gallons 

Air Tank Design 

Wheelbarrow Dual Tank System 

Maximum Air PSI 

115 PSI 

Cubic Feet Per Minute Rating 

10.3 CFM @ 40 PSI / 8.5 CFM @ 90 PSI 

Air Outlet Size 

3/8” NPT 

Tank Drain Valve Design 

Duel Bottom Tank Bleeders 

Automatic Compressor Shut-Off 

Yes, At 115 PSI 

Compressor Cylinder/Crankshaft Construction 

Cast Iron 

Wheel Size / Type 

10”, 4.10/8.5-4, Pneumatic 

Power Source 

6.5 HP Briggs & Stratton® 
Intek® Gasoline Engine 
Engine Displacement: 206cc 
Recoil Start 

 

Never use compressed air on yourself or another to blow off clothing, skin or hair.

REV 10/05; REV 02/06

Summary of Contents for 90749














Reviews: