SKU 42332 For technical questions, please call 1-800-444-3353 PAGE 8
3.
Push the Magazine A (41) back into the Stapler and secure it with the Lock (58).
OPERATING THE STAPLER
1.
Attach the Stapler to the air supply at the Air Plug (66). Start your compressor
and check the pressure, making sure it is set at the recommended 55-95 PSI.
Do not exceed the maximum 95 PSI.
2.
Rotate the Exhaust Cover (1) so that the exhaust air blast will be directed away
from the operator.
3.
To fire, place the Drive Guide (48) on the Stapler on the workpiece. The Stapler
should not fire if the Drive Guide is not depressed. Once depressed, gently and
briefly squeeze the Trigger (35) once. Do not fire repeatedly. Staples could
bounce off of one another, damaging the workpiece or causing personal injury.
4.
Do not press the Drive Guide (48) against the workpiece with extra force. Allow
the tool to do the work. Always allow the tool to recoil off the work surface.
5.
When finished using the Stapler, always disconnect the tool from its air supply.
Empty the Magazine B (49) completely of Staples (69). Attempt to fire the Stapler
into a piece of scrap wood to ensure it is disconnected and is incapable of firing
any Staples.
6.
Make sure to store the Stapler in a clean, dry, safe location out of reach of
children.
MAGAZINE B (49)
DRIVE GUIDE (48)
TRIGGER
(35)
DRIVE COVER (46)
