Central Machinery CENTRAL MACHINERY 44859, Assembly And Operating Instructions Manual

Page: 4 / 31

Page 4
SKU 44859
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor Freight
Tools.
18.
do not operate tool if under the influence of alcohol or drugs
. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
19. use proper size and type extension cord . If an extension cord is required, it must be
of the proper size and type to supply the correct current to the tool without heating up.
Otherwise, the extension cord could melt and catch fire, or cause electrical damage
to the tool. This tool requires use of an extension cord of
0 to 12 amps capability (up
to 50 feet), with wire size rated at
16 aWg
. Longer extension cords require larger size
wire. If you are using the tool outdoors, use an extension cord rated for outdoor use
(signified by “WA” on the jacket).
21. maintenance . For your safety, service and maintenance should be performed
regularly by a qualified technician.
22. Know your power tool . Read and understand this assembly and operating manual,
and labels affixed to the tool. Learn it’s application and limitations, as well as the
specific potential hazards particular to this tool.
23.
ground the tool
. This tool is equipped with an approved 3-conductor cord and 3-
prong grounding type plug to fit a grounding type receptacle. The green wire in the
cord is the grounding wire. Never connect the green wire to a live terminal.
24.
use safety guards
. Keep guards in place, in working order, and in proper adjustment
and alignment.
25.
secure workpiece
. Use clamps or a vise to hold workpiece when practical. Keep both
hands free to operate tool.
26.
direction of Feed
. Feed workpiece into the blade or cutter against the direction of the
rotation.
note
: Performance of this tool may vary depending on variations in local line voltage. Exten-
sion cord usage may also affect tool performance.
Warning: the warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. it must be under-
stood by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
unpacking
When unpacking, check to make sure that all the parts are included. Refer to the Accesso-
ries list in the Specifications table, and the Parts List.
If any parts are missing or broken, please call Harbor Freight Tools at the number on the
cover of this manual as soon as possible.
07h