Page 4
SKU 95906
For technical questions, please call 1-800-444-3353.
TOOl UsE And CARE
do not force the tool. Use the correct tool for your application.
The correct
tool will do the job better and safer at the rate for which it is designed. Do not force
the tool and do not use the tool for a purpose for which it is not intended.
do not use the power tool if the Engine’s Ignition switch does not turn it on
or off.
Any tool that cannot be controlled with the Ignition Switch is dangerous and
must be replaced.
disconnect the spark Plug wire from the Engine before making any adjust-
ments, changing accessories, or storing the tool.
Such preventive safety
measures reduce the risk of starting the tool accidentally.
Always disconnect the
spark Plug wire before performing any inspection, maintenance, or cleaning
procedures.
store idle tools out of reach of children and other untrained persons.
Tools
are dangerous in the hands of untrained users.
Maintain tools with care. keep the Mortar Mixer clean.
Properly maintained
tools are less likely to malfunction and are easier to control. Do not use a damaged
tool. Tag damaged tools “Do not use” until repaired.
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool’s operation. If damaged, have the tool
serviced before using.
Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your
model.
Accessories that may be suitable for one tool may become hazardous
when used on another tool.
sERVICE
Tool service must be performed only by qualified repair personnel.
Service or
maintenance performed by unqualified personnel could result in a risk of injury.
when servicing a tool, use only identical replacement parts. Follow instruc-
tions in the
“Inspection, Maintenance, And Cleaning”
section of this manual.
Use of unauthorized parts or failure to follow maintenance instructions may create
a risk of injury.
sPECIFIC sAFETy RUlEs
IMPORTAnT! your warranty is voided if:
you do not put engine oil in the Engine’s crankcase prior to its first use.
Before
each use, check the oil level. Never run the Engine with low or no engine oil. Run-
ning the Engine with low or no Engine oil will permanently damage the Engine.
1.
2.
3.
4.
5.
6.
7.
1.
2.
1.
