background image

SKU 95346       

 for technical questions, please call 1-800-444-3353 

PAGE 19

5.  Service and Maintenance

Component parts which are not scheduled for replacement as required maintenance or are scheduled only for regular inspection 

to the effect of “repair or replace as necessary” are warranted for the warranty period. Any warranted part which is scheduled 

for replacement as required maintenance is warranted for the period of time up to the first scheduled replacement point for that 

part.  Any replacement part, provided it is equivalent in durability and performance, may be used in performance of maintenance 

or repairs.  The owner is responsible for commissioning a qualified technician/mechanic to perform all required maintenance, as 

outlined in the 

Inspection, cleaning, and Maintenance

 section on pages 11 and 12 of this manual.

6.  Warranted Parts

1)  fuel Metering System

i) 

Carburetor and its internal parts.

ii)  Fuel pump (if so equipped).
iii)  Cold start enrichment system.

2)  Air Induction System

i) 

Intake pipe/manifold.

ii)  Air cleaner.

3)  Ignition System

i) 

Spark plug.

ii)  Magneto ignition system.

4)  catalyst System (if so equipped)

i) 

Exhaust pipe stud.

ii)  Muffler.

iii)  Catalytic converter (if so equipped).

5)  Miscellaneous items Used in Above Systems

i) 

vacuum, temperature and time sensitive valves and switches.

ii)  Hoses, belts, connectors, and assemblies.

LIMItED 1 yEAR / 90 DAy WARRANty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability 

standards, and warrants to the original purchaser that for a period of ninety days from date of purchase that 

the engine/motor, the belts (if so equipped), and the blades (if so equipped) are free of defects in materials 

and workmanship. Harbor Freight Tools also warrants to the original purchaser, for a period of one year from 

date of purchase, that all other parts and components of the product are free from defects in materials and 

workmanship (90 days if used by a professional contractor or if used as rental equipment).  This warranty 

does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or 

alterations outside our facilities, normal wear and tear, or to lack of maintenance. We shall in no event be 

liable for death, injuries to persons or property, or for incidental, contingent, special or consequential dam-

ages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental 

or consequential damages, so the above limitation of exclusion may not apply to you.  THIS WARRANTY IS 

ExPRESSLY IN LIEU OF ALL OTHER WARRANTIES, ExPRESS OR IMPLIED, INCLUDING THE WAR-

RANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation 

charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchan-

dise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may 

elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will 

return repaired products at our expense, but if we determine there is no defect, or that the defect resulted 

from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from 

state to state.

3491 Mission Oaks Blvd.  •  PO Box 6009  •  Camarillo, CA 93011  •  (800) 444-3353

Emission control System Warranty

 - continued

Harbor freight tools Emission control Defects Warranty Provisions

Summary of Contents for 95346




















Reviews: