Page 7
For technical questions, please call 1-800-444-3353.
SKU 67414
service precautions
before service, maintenance, or
1.
cleaning:
turn the engine switch to its
a.
“oFF” position.
allow the engine to completely
b.
cool.
then, remove the spark plug
c.
wire(s) from the spark plug(s).
Keep all safety guards in place and
2.
in proper working order. Safety
guards include muffler, air cleaner,
mechanical guards, and heat shields,
among other guards.
do not alter or adjust any part of
3.
the equipment or its engine that
is sealed by the manufacturer
or distributor. Only a qualified
service technician may adjust
parts that may increase or
decrease governed engine speed.
Wear ANSI-approved safety goggles,
4.
heavy-duty work gloves, and dust
mask/respirator during service.
Maintain labels and nameplates
5.
on the equipment. These carry
important information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
Have the equipment serviced by a
6.
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
equipment is maintained. Do not
attempt any service or maintenance
procedures not explained in this
manual or any procedures that you
are uncertain about your ability to
perform safely or correctly.
Store equipment out of the reach of
7.
children.
Follow scheduled engine and
8.
equipment maintenance.
Refueling Precautions:
9.
Do not smoke, or allow sparks,
a.
flames, or other sources of ignition
around the equipment, especially
when refuelling.
Do not refill the fuel tank while the
b.
engine is running or hot.
Do not fill fuel tank to the top. Leave
c.
a little room for the fuel to expand as
needed.
Refuel in a well-ventilated area only.
d.
save tHese
instructions.
