THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the
owner’s record below:
Model_____________ Serial No.____________
Purchase Date_____________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire
manual to become familiar with the unit BEFORE you begin assembly.
Technical Specifications
Tool Name:
34" Radial Bench Drill Press
Item Number:
42289
Motor:
120V/60HZ, 3 Amps, Single Speed, 1720 RPM
Radial Travel:
12"
Spindle RPM:
620, 1100, 1720, 2340, 3100
Spindle Taper:
JT3
Spindle Stroke:
3"
Max. Spindle to Base:
17"
Max. Spindle To Table:
12-3/16"
Column Diameter and Length:
2.335" Diameter X 19-1/8" Length
Chuck Taper:
JT3
Chuck Size:
5/8" with Auto Eject Chuck Key
Weight:
112 Lbs.
Overall dimensions:
64-7/8" H x 33" L
Mounting Holes:
7/8"
Quill Diameter:
1.575"
Warning:
The warnings, cautions and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must
be understood by the operator that COMMON SENSE AND CAUTION ARE
FACTORS WHICH CANNOT BE BUILT INTO THIS PRODUCT, BUT
MUST BE SUPPLIED BY THE OPERATOR.
The Operator
PLEASE REMEMBER:
Do not operate the product if under the influence of alcohol or drugs. Read warning labels on prescriptions to
determine if your judgment/reflexes might be impaired.
Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective gloves and non-skid footwear is recommended.
Wear restrictive hair covering to contain long hair.
Use eye and ear protection. Always wear ANSI approved impact safety goggles and
dust mask or respirator when working around metal, wood and chemical dusts and mists.
Wear a full face shield if your are producing metal or wood filings.
Do not reach over or across running machines.
#42289
REV 11/04
Page 2
Brought to You by Augusta Flint
