Page 4
for technical questions, please call 1-800-444-3353.
SKU 91764
SpecificationS
Rated Capacity
1000 lb. (
1
/
2
ton)
Height Range
18-
1
/
2
” (1
st
lock)
27-
3
/
4
” (2
nd
lock)
Features
Tire Vise
Wheel Stop
Leveling Pads
Swivel Casters (front)
Locking Bar
Platform Dimensions 86-
1
/
2
” L x 26-
3
/
4
” W
Weight
350 lb.
unpacKing
When unpacking, make sure the
following parts are included:
Main lift assembly access panel
hardware Kit
Vise assembly
lift foot pedal
locking bar
release foot pedal ramp
If any parts are missing or broken,
please call Harbor Freight Tools at the
number on the cover of this manual.
aSSeMbly
read the entire iMportant
Safety inforMation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Raise the end of the Frame Assembly
1.
near the Access Panel (36), and
support it on blocks.
frame
assembly
front
axle (52)
cotter
pin (47)
front
Wheel (44)
Washer (43)
2. Place a Front Wheel (44) and Washer
(43) on the end of the Front Axle (52).
Insert a Cotter Pin (47) through the
hole in the Axle, and bend it to secure
the Wheel in place. Repeat for the
other Front Wheel (44).
Lower the Frame Assembly off the
3.
blocks.
Turn the Lifting Screws (18)
4.
clockwise to raise the opposite end of
the Frame Assembly.
Washer (13)
nut (21)
lifting
Screw
(18)
lock
Washer (20)
caster (14)
Washer (13)
bolt (12)
frame
assembly
5. Install the Casters (14) to the Frame
using Bolts (12), Washers (13), Lock
Washers (20), and Nuts (21), as
shown above.
reV 08k
