background image

Page 2 

For technical questions, please call 1-800-444-3353.

 

Floor Jacks

 

SaVe THiS manual

Keep this manual for the safety warn-

ings and precautions, assembly, operat-

ing, inspection, maintenance and cleaning 

procedures.  Write the product’s serial 

number in the back of the manual near the 

assembly diagram (or month and year of 

purchase if product has no number).  Keep 

this manual and the receipt in a safe and 

dry place for future reference.

IMPORTANT SAFETY 

INFORMATION

in this manual, on the labeling, 

and all other information provid-

ed with this product:

  This is the safety alert 

symbol.  it is used to alert 

you to potential personal 

injury hazards.  Obey all 

safety messages that 

follow this symbol to avoid 

possible injury or death.

 

DANGER indicates 

a hazardous 

situation which, if not 

avoided, will result in death or 

serious injury.

 

WARNING 

indicates a 

hazardous situation which, if 

not avoided, could result in 

death or serious injury.
 

CauTiOn, used 

with the safety 

alert symbol, indicates a 

hazardous situation which, if 

not avoided, could result in 

minor or moderate injury.

 

NOTICE is used to 

address practices 

not related to personal injury.
 

CauTiOn, without 

the safety alert 

symbol, is used to address 

practices not related to 

personal injury.

Safety Warnings

 WARNING Read all safety 

warnings and instructions. 

Failure to heed these markings 

may result in personal injury and/or 

property damage. 

Save all warnings and 

instructions for future reference.

Study, understand, and follow all 

1. 

instructions before operating this 

device.
Do not exceed rated capacity.

2. 

Use only on hard, level surfaces.

3. 

Lifting device only.  Immediately after 

4. 

lifting, support the vehicle with appro-

priate means.
Do not move or dolly the vehicle 

5. 

while on the jack.
Do not adjust safety valve.

6. 

Wear ANSI-approved safety goggles 

7. 

and heavy-duty work gloves during 

use.
Keep clear of load while lifting and 

8. 

lowering.
Lower load slowly.

9. 

Do not use for aircraft purposes.

10. 

Apply parking brake and chock tires 

11. 

before lifting vehicle.

Summary of Contents for 42820













Reviews: