SKU 94428 & 94429
For technical questions please call 1-800-444-3353.
Page 3
REPLACEMENT PARTS AND ACCESSORIES.
When servicing, use only identical
replacement parts. Only use accessories intended for use with this product. Ap-
proved accessories are available from Harbor Freight Tools.
MAINTAIN PRODUCT WITH CARE.
Keep this product clean and dry, and moving
parts lightly lubricated for better performance. Keep the Handle dry, clean and free
from oil, grease, and solvents.
USE THE RIGHT PRODUCT FOR THE RIGHT JOB.
Do not attempt to force a small
tool or attachment to do the work of a larger industrial tool. There are certain applica-
tions for which this tool was designed. It will do the job better and more safely at the
rate for which it was intended. Do not modify this tool and do not use this tool for any
purpose other than which it was intended.
UNPACKING
When unpacking, check to make sure all parts shown on the Parts List (page 6) are in-
cluded. If any parts are missing or broken, please call Harbor Freight Tools at the number
shown on the cover of this manual as soon as possible.
9.
10.
11.
NOTE: All parts below refer to the parts listed on page 6 of this manual.
Use 3/16”
diameter bolts of the appropriate length when mounting your Vise. Bolts, Lock Washers
and Nuts for mounting are NOT provided.
You can mount the Vise or use it in a portable
manner, depending on what product you are working on or with.
Setting Up The Vise:
Use the mounting holes on the Vise Base Plate (1) as a template. Set the Vise flat
on the workbench and, with a pencil, mark the points at which to fasten the Vise onto
the workbench. Set the Vise aside.
Drill holes of the appropriate size (where previously marked with a pencil) through
the top of the workbench.
Caution:
Before drilling holes, check for hidden electrical
wires or cords in drilling path.
Carefully set the Fixed Base (1) of the Vise with the Mounting Holes corresponding
to the holes previously drilled through the top of the workbench.
See Figure 1 next page.
Insert hardened steel bolts (not provided), of the appropriate diameter (to fit 1/2”
diameter mounting holes) and length, downward through the Fixed Base (1) and
through the workbench. The length of the mounting bolts will be determined by the
thickness of the workbench. Secure the mounting bolts in place with the appropriate
washers and nuts.
1.
2.
3.
4.
