SKU 92553 For technical questions, please call 1-800-444-3353.
Page 3
7.
Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of children.
8,
Use eye and hand protection. Always wear ANSI approved impact safety
goggles when setting up this product. Wear heavy duty work gloves when
working with this product.
9.
Stay Alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
10. Use eye protection. Always wear ANSI approved impact safety goggles.
Wear a full face shield if you are production metal filings or wood chips.
Wear an ANSI approved dust mask or respirator when working around
metal, wood, and chemical dusts and mists.
11. Maintain products with care. Keep tools sharp and clean for better and
safer performance. Follow instructions for lubricating and changing
accessories. The handle must be kept clean, dry, and free from oil and
grease at all times.
12. Take Caution as some woods contain preservatives such as copper
chromium arsenate (CCA) which can be toxic. When working with this
type of wood, extra care should be taken to avoid inhalation and minimize
skin contact.
13. Do not overreach. Keep proper footing and balance at all times.
14. Do not operate any tool if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgement or reflexes
are impaired while taking drugs. If there is any doubt, do not use this tool.
15. Maintenance. During periods of storage, coat the bare metal surfaces with
light oil to inhibit rust.
Warning: The warnings, cautions, and instructions discussed in this instruc-
tion manual cannot cover all possible conditions and situations that may oc-
cur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by
the operator.
Unpacking
When unpacking this set, check to make sure that all parts are included as
shown in the parts list. If any parts are missing or broken, please call
Harbor Freight Tools at the number below.
Warning! Do not let the blade come into contact with your hands while planing or
changing the blade. The blade is extremely sharp and can cause severe injury.
