10
10
Zephiro Fog 900 User Manual
Eng
y
Keep it in horizontal position, do not tilt or flip. Before connecting this unit to
mains, fill in the tank with fluid. Always use water-based fog fluid and check
that nozzle is clean and unobstructed.
y
Before connecting to power, check whether mains voltage is suitable for the unit
or not.
y
Connect the supplied wired controller or the wireless receiver to rear panel of
the fog machine (n.2)
y
Power cord should be plugged into a grounded electrical outlet. Once con-
nected, put power switch to “ON”, then fog machine start warming up and the
indicator LED on the rear panel is red. During the warm up process, also the red
LED on the wired controller is ON. After heating is complete, the indicator LED
on the rear panel turns green. In the same time, on the wired controller, the red
LED turns OFF and the green LED turns ON; then fog machine is ready to use.
y
Use the wired controller or the supplied wireless control, in order to activate the
fog machine.
6 - C
onTrol
M
ode
Zephiro FOG 900 can be operated with a manual controller or with a remote con-
troller according to which it is connected in the appropriate socket
WIRED/WIRELESS CONTROL
6.1. Controllers
A
B
2
1
3
WIRELESS CONTROLLER
WIRED CONTROLLER
