13
13
ZEPHIRO 600 SPARK User Manual
Eng
Complimentary signal cable can transmits signals to 20 unit fixtures at most.
Signal amplifier is a must to connect more fixtures.
4.5. 3-Pin vs 5-Pin DMX cables
DMX connection protocols used by controllers and fixtures manufacturers are not
standardized around the world. However, two are the most common standards:
5-Pin XLR and 3-Pin XLR system. If you wish to connect MOOD 185 WASH to a 5-Pin
XLR input fixture, you need to use an adapter-cable or make it by yourself.
Following the wiring correspondence between 3-Pin and 5-Pin plug and socket
standards
5-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5 - f
ronT
p
anel
d
esCripTion
MENU
DOWN
UP
ENTER
DMX Address 1
592
READY
DMX
FAULT
HEAT
2
3
4
5
6
7
9
8
1
The operation panel includes the LCD information display area, LED indicator status
display area and control button operation area.
1) 2x16 Characters LCD DISPLAY
It shows the operating mode and other system information.
2) UP BUTTON
It scrolls up individual items in the selection menu and sub-menus for system set-
tings (DMX address, Manual Height, etc.), and increases values/settings of parame-
