AUTORANGING INSULATION TESTER
instruction manual
7
VII. BATTERY CHANGING
When appear on the LCD, the battery need to be replaced with
new ones. To replace the battery the user should turn the function
selector to OFF position. Then the user needs to open the battery
compartment cover with a screwdriver. Eight AA 1.5V batteries are
needed to replace the old ones. After all Batteries are changed,
put the cover back and fasten the screw.
VIII. FUSE CHANGING:
When connect the meter under Ohm rang to a source > 10V, the
protection fuse will break the circuit and new one will be needed
for replacement. To replace the fuse, user should prepare an F
0.5A 600V fuse. First, the user should turn the test off and remove
the test leads then remove the Beck Cover and Replace the fuse.
