Center 262, Instruction Manual, Page: 13 / 20

Clamp Meter
9
6-4 DCV Measurement
：
Switch the main function
selector to range.
Connect red test lead to
“
+
”
terminal and black one
to the
“
COM
”
terminal.
Measure the voltage by touch
the test lead tips to the test
circuit where the value of
voltage is needed.
Read the result from the LCD
panel.
6-5 Continuity Test With Buzzer
：
Switch the main function to range.
Connect red test lead to
“
+
”
terminal and black one to the
“
COM
”
terminal.
Connect tip of the test leads to the points where the conduction
condition needed.
If the resistance is under 100
Ω , the beeper will sound continuously.
Short circuit Open circuit