9.
DON’T LEAVE UNIT ON
or near objects of high temperature.
10.
DO NOT OVERREACH.
Keep proper footing and balance at all times when
using this product.
11.
REPLACEMENT PARTS AND ACCESSORIES.
When servicing, use only identical
replacement parts. Only use accessories intended for use with this product. Approved
accessories are available from Harbor Freight Tools.
12.
MAINTAINING PRODUCT.
This is a delicate/precision instrument. Keep clean and dry.
Any repairs should be done by qualified technicians only.
13.
USE THE RIGHT PRODUCT FOR THE RIGHT JOB.
There are certain applications
for which this product was designed. It will do the job better and more safely at the rate
for which it was intended. Do not modify this tool and do not use this tool for any purpose
other than which it was intended.
UNPACKING
When unpacking, check to make sure all parts shown on the Parts List (page #5) are included.
If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
The Infrared Laser Thermometer
With this non-contact Thermometer, you can point, shoot and read the Laser by pointing directly at
the target and get an accurate reading. Switch from Fahrenheit to Celsius for instant temperature
readings. Temperature measurement has never been easier. Accuracy is +/- 2%. Response time is
500MS. It’s flashlight shape design has a Storage Case making it compact and portable.
Electronic field:
This instrument can measure the radiation point of an electric panel, fuse, dyna-
motor and gearbox and electronic parts.
Do not use product in following fields-
EMF (electromagnetic fields), arc welder, induction
heater, etc.
Heating and Air-Condition field:
Checks and monitors supply, leakage of pipe and air
stratification.
Automotive field:
Check cylinder, heat system & cool system, scan radiator, etc.
Food field:
When foods are stored, measures surface temperatures in accordance with HACCP
(Hazard Analysis & Critical Control Point) standards.
Assembly of Infrared Thermometer
1.
Slide off the Battery Cover exposing the Battery Cavity (#7).
See Figure 2.
2.
Insert the DC 9V Battery (not included) into the Battery compartment.
DISPOSE OF OLD
BATTERIES PROPERLY.
Never put in fire. Contact local Hazard Waste Disposal
authorities for proper guidelines. Replace Battery Cover over the Battery Cavity (#7) after
inserting a new Battery.
SKU 90380
PAGE 3