SKU 90380 PAGE 2
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
1.
KEEP PRODUCT USAGE AREA CLEAN.
Cluttered areas invite injuries.
2.
KEEP CHILDREN AWAY FROM PRODUCT.
This is not a toy. It is a delicate/
precision instrument. Do not allow children to handle this product.
3.
TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE, FIRE AND
SHOCK,
make sure your work area is free of damp, wet or rainy conditions.
4.
USE EYE PROTECTION. NEVER
point the laser directly at the eye. Do not point
laser on or indirectly off of a reflective surfaces such as Stainless Steel or
Aluminum, etc.
6.
CHECK FOR DAMAGED PARTS.
Before using this product, carefully check that it
will operate properly and perform its intended function. Check for damaged parts and
any other conditions that may affect its operation. Replace or repair damaged or
worn parts immediately.
7.
DO NOT USE PRODUCT IN FOLLOWING FIELDS-
EMF (electromagnetic fields),
arc welder, induction heater, etc.
8.
ABRUPT TEMPERATURE CHANGE CAN CAUSE HEAT SHOCK.
If this occurs,
allow 30 minutes for thermal stabilization before using again to prevent the possibility
of inaccurate temperature readings.
DESCRIPTION
ITEM
SPECIFICATIONS
Material
Finish
Storage Case
Non-Contact
Thermometer w/
Laser
Distance and
Spot Size
4 Digital Readout
Battery (not included)
Plastic Housing w/LCD Display
Black Housing w/Yellow Trim
Green Polyester with Black Trim/ Zipper,
Padded
Switch from Fahrenheit to Celsius, LCD
Display, last reading is held for 7 seconds
D/S:6:1, 1”@6”, 2”@12”, 4”@24”
Reading: 0F to 650F Degrees and
-18C to 315C Degrees
9V Alkaline or NICAD Battery (required)