FIRE ALARM EQUIPMENT
CEME FA-777S-10 2020
FIRE ALARM SYSTEM
Instructlons
FA-777S-10 1-10 Zone Detector
Fire Alarm Control Panel
FA-777S-10 1-10 Zone Detector
System Control and Indicator On Board
NORMAL CONDITION
- The green
MAINS ON
light is lit - The Key switch is at
NORMAL
ALARM CONDITION
- the alarm sounders operate and the red
FIRE
lights flash -
EVACUATE THE BUILDING
TO SILENCE ALARM SOUNDERS
- Turn the key switch to
ARM CONTROLS,
then press the
SILENCE ALARM SOUNDERS
button, the lights will go steady, and the
FAULT SOUNDER
will Sound, Do not Press the
RESET/ RESOUND/ TEST ZONE
LAMPS
button until you have identified the detector causing the alarm signal. When you have indentified the cause of the alarm
signal, press the
RESET/ RESOUND/ TEST ZONE LAMPS
button to re-arm the system. Pressing the button will
RESOUND
the sounders, when the alarm still exists.
FAULT CONDITION
- The
FAULT SOUNDER
sounds and a yellow
FAULT
light comes on. ldentity the fault light - Check that
the
MAINS ON
light is on and call the engineer.
TO SILENCE
- The
FAULT SOUNDER
Turn the key switch to
ARM CONTROLS
and press the
SILENCE FAULT SOUNDER
button. Press the
SILENCE FAULT SOUNDERS
to evacuate.
Turning the key switch to
ARM CONTROLS
and Pressing
EVACUATE
will always operate the alarm
SOUNDERS.
TO TEST
- the fault sounder and the zone lamps, turn the key switch to
ARM CONTROLS
and press the
RESET/ RESOUND/
TEST ZONE LAMPS
button.
For further information. please check the instruction manual.
1 Key Switch Control
2 Reset Resound Test Zone Lamps Switch
3 Silence Alarm Sounders Switch
4 Silence Fault Sounders Switch
5 Evacuate Switch
6 Sounder Fault Indicator (Yellow Color)
7 Battery Power Fault Indicator (Yellow Color)
8 Mains On Indicator (Green Color)
9 18 Zone Indicator
Zone Alarm (Red Color)
Zone Fault (Yellow Color)
Model YA-CP100 (FA-777S-10) MADE IN CHINA
SHENZHEN USAFE INTELLINGENT
TECHNOLOGY CO., LTD
1
2
3
6
7
8
4
5
9
