5
2. GENERAL CHARACTERISTICS
Type
TC050Y-KV TC065Y-SC-KV TC085Y-KV TC096Y-KV TC120Y-KV
Max. cutting cable diameter
2”
(50 mm)
2-9/16”
(65 mm)
3-3/8”
(85 mm)
3-3/4”
(95 mm)
4-3/4”
(120 mm)
Max. operating pressure
10,000 psi (700 bar )
Oil necessary, displacement
2.4 cu. in.
(39 cm
3
)
5.2 cu. in.
(86 cm
3
)
5.5 cu. in.
(90 cm
3
)
7.6 cu. in.
(124 cm
3
)
11.1 cu. in.
(182 cm
3
)
Weight
7.5 lbs
(3.4 kg)
12.3 lbs
(5.6 kg)
12.1 lbs
(5.5 kg)
18.5 lbs
(8.4 kg)
21.3 lbs
(9.7 kg)
Dimensions
Ref. to page 10
– Application range:
cable cutting safety heads can only be used to cut Copper and Aluminum
cables where the absence of voltage cannot be guaranteed.
Hydraulic cable cutting safety heads must be used only with insulated flexible hoses and
hydraulic pumps containing insulating oil.
Insulating oil is a special hydraulic oil with properties which insulate the pump from the
cutting head.
3. INSTRUCTIONS FOR USE
Cable cutting units (head and pump) must be used as described herein and always observing
working procedures estabilised by the responsible power utility.
3.1) Preparation
Only remove the cutting head from its case at the work place.
TC065Y-SC-KV and TC085Y-KV:
mount the support handle (4) on the head by screwing it onto the
threaded pin (14); at the end of the work, remove the handle before storing the head in its case.
TC065Y-SC-KV
TC085Y-KV
14
14
4
4
