15
4
Loading material
In case of continuous film TTF or continuous strip STRIP-ROLL, position the label sensor (1) at any point on the
material.
For non-recangular labels (e.g. TTL circular), position the label sensor (1) on the central axis.
LABEL SENSOR
POSITION
LABEL SENSOR
POSITION
LABEL SENSOR
POSITION
LABEL SENSOR
POSITION
LABEL SENSOR
POSITION
LABEL SENSOR
POSITION
LABEL SENSOR
POSITION
TTL.....
TPM-ROLL.....
ETF-ROLL.....
KM-ROLL..... (*)
TTF...
STRIP-ROLL...
TTL....
Fig. 13 Examples of label sensor setting
4.1.5 Setting the print head locking system
!
Attention!
Usually no adjustment is required, so proceed with caution as incorrect setting may move the plungers
printhead from its optimum position, reducing print quality and possibly damaging the printer.
The printhead has a three point locking system which is factory set in order to:
• achieve even print quality across the entire label width
• prevent creases in the feed path of the ribbon
• prevent premature wearing of the print roller and printhead.
1
2
3
Fig. 14
Setting the print head locking system
