Cembre CPP-0, Operation And Maintenance Manual

Page: 4 / 28

4
2. INSTRUCTIONS FOR USE
2.1) Setting
Place the pump on a flat surface so as to rest the whole base on the ground.
This position will give the necessary stability during the operation.
The ambient working temperature must not exceed 50 C° (120° F).
The working environment must be free from corrosive chemicals, oils and greases.
Before tool operation ensure that the air pressure is between 6 and 8 bar (87 ÷ 115 psi):
absolutely
do not use the pump if the air pressure exceeds 8 bar (115 psi).
2.2) Operation
(Ref. to Fig. 3 a-b-c)
Press the pedal (06) on “ PUMP ” side to commence the build up of pressure.
Continue pumping until completion of the operation (dies closing in case of compression head;
full cable cut in case of cutting head; etc).
Note: for crimping heads, it is recommended to continue pumping until the maximum pressure
valve is actived and a repetitive "click" is heard.
To release oil pressure in the pump circuit (and therefore reset the head or blade in the rest posi-
tion) depress pedal on “
RELEASE ” side. To halt the operation at any stage, or to stop the pump and
maintain the oil pressure, release pedal (06).
2.3) Storage
After the completion of the work, release the oil pressure and disconnect the air supply.
Coil the hose around the casing and cover the pump, to protect from dust. Store the pump in a
clean, dry enviroment.
3. PART LIST
(Ref. to Fig. 6)
The guarantee is void if parts used are not
Cembre
original spares.
When ordering spare parts always specify the following:
- code number of item
- name of item
- type of pump
- pump serial number
4. RETURN TO
Cembre
FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certificate supplied by
Cembre
together with the tool or fill in and attach
the form available in the “ASSISTANCE” section of the
Cembre
website.
6019029 01 OIL INLET VALVE 1
6160115 02 PUMP BODY 1
6019030 03 PRESSURE RELEASE VALVE 1
6800066 04 OIL FILLER PLUG 1
6550051 06 FOOT PEDAL 1
6631120 07 GUARD 1
6019035 08 PIVOT PIN 1
6019031 09 COVER PLATE 1
Code N° Item DESCRIPTION Qty
6019028 10 AIR INLET VALVE 1
6019032 11 HEAD 1
6650090 12 COUPLER 1
6019025 13 ANTI-RETURN VALVE 1
6720090 14 RESERVOIR 1
6650052 15 AIR COUPLER 1
6019027 16 MAX PRESSURE VALVE 1
6019033 17 CYLINDER 1
ENGLISH
Code N° Item DESCRIPTION Qty