Cembre B54N-YD6, Operation And Maintenance Manual, Page: 8 / 10

8
2.9) Jaw replacement
Each tool is supplied with relevant jaws (see § 1). Jaws
can also be supplied separately, for replacement pro-
ceed as follows:
–
Push and turn clockwise the locking pin (9) so that
the jaws are released.
– Slide the jaws out of the top of the tool and insert the
new ones (see Fig. 5)
.
– Fully insert the locking pin (9) into the tool and lock it
by turning clockwise until the red lines are aligned.
red lines
9
FIG. 5
3. WARNING
Before starting work on electrical equipment, please ensure that either there are no live parts
in the immediate working area or that precautions are taken for working near live parts in
accordance with EN50110-1.
D
O NOT USE THIS TOOL ON OR NEAR ENERGISED CONDUCTORS WITHOUT PROPER
PERSONAL PROTECTIVE EQUIPMENT
. F
AILURE TO OBSERVE THIS WARNING COULD
RESULT IN SEVERE INJURY OR DEATH
.
T
HE TOOL IS UNSUITABLE FOR CONTINUOUS USE AND SHOULD BE ALLOWED TO COOL
DOWN FOLLOWING UNINTERRUPTED
,
SUCCESSIVE CRIMPING OPERATIONS
;
FOR INSTANCE
,
HAVING EXHAUSTED A FULLY CHARGED BATTERY IN ONE SESSION
,
DELAY BATTERY
REPLACEMENT FOR A FEW MINUTES
.
O
BSERVE RECOMMENDED REST PERIODS ALSO WHEN USING AN EXTERNAL POWER
SUPPLY
.
P
ROTECT THE TOOL FROM RAIN AND MOISTURE
. W
ATER WILL DAMAGE THE TOOL AND
BATTERY
. E
LECTRO
-
HYDRAULIC TOOLS SHOULD NOT BE OPERATED IN POURING RAIN
OR UNDER WATER
D
O NOT USE THIS TOOL ON OR NEAR ENERGISED CONDUCTORS WITHOUT PROPER
PERSONAL PROTECTIVE EQUIPMENT
. F
AILURE TO OBSERVE THIS WARNING COULD
RESULT IN SEVERE INJURY OR DEATH
.
T
HE TOOL IS UNSUITABLE FOR CONTINUOUS USE AND SHOULD BE ALLOWED TO COOL
DOWN FOLLOWING UNINTERRUPTED
,
SUCCESSIVE CRIMPING OPERATIONS
;
FOR INSTANCE
,
HAVING EXHAUSTED A FULLY CHARGED BATTERY IN ONE SESSION
,
DELAY BATTERY
REPLACEMENT FOR A FEW MINUTES
.
O
BSERVE RECOMMENDED REST PERIODS ALSO WHEN USING AN EXTERNAL POWER
SUPPLY
.
P
ROTECT THE TOOL FROM RAIN AND MOISTURE
. W
ATER WILL DAMAGE THE TOOL AND
BATTERY
. E
LECTRO
-
HYDRAULIC TOOLS SHOULD NOT BE OPERATED IN POURING RAIN
OR UNDER WATER
13
5
13
16
9
8
2
4
11
11
15
7
X
X
X
X
X
X
45
Serial number of tool