16
24
26
31
19
18
17
75
30
67
16
350
67
64
65
66
310
70
45
63
77
360
71
62
5
4
3
3
12
13
15
16
6
8
17
11
11
600
9
2
1
1
65
27
72
69
3
4
2
320
68
*
5
2. INSTRUCTIONS FOR USE
The tool is equipped with automatic return of the dies once the crimping operation is com-
pleted.
The interchangeable crimping jaws have thermoplastic rubber covers on outside edges.
Residual battery capacity level is automatically displayed after every cycle.
The part reference
“B54...”
includes the following:
– Basic tool complete with battery
– Spare battery
– Battery charger
– Canvas bag.
2.1) Preparation
With the tool in the rest position
(the ram fully retracted)
proceed as follows:
– Select the appropriate groove or die set for the connector to be crimped.
– Insert the dies into the jaws of the tool (see § 2.8).
– Insert the conductor into the connector.
2.2) Die advancement
(Ref. to Fig. 1)
Grip the tool
fi
rmly and comfortably.
– Position the connector in the die groove
and ensure the correct location of the
crimp.
– Press operating button (3) to activate
the motor-pump group for the advance-
ment of the ram. To halt the advance-
ment, release the operating button and
the motor will cut out.
Make sure the dies are exactly po-
sitioned on the desired crimp point
otherwise re-open dies following in-
structions as per § 2.5 and reposition
the connector.
8
3
FIG. 1
)
3
G. 1