CEMB SM628TI, User Manual

Page: 25 / 184

User’s manual 25
EN
Install the tyre changer in the chosen work position, complying with the minimum clea-
rances shown in fig.8 .
The support surface must have a load-bearing
capacity of at least 1000 kg/m
2
.
Ambient working conditions
- Relative humidity 30% ÷ 95% without conden-
sation.
- Temperature 0°C ÷ 50°C.
WARNING
Whenever the machine is disconnected from the pneumatic line for long periods,
before restoring the pneumatic supply, check the configuration of the pedals
as shown below.
DANGER
Before proceeding with the electrical and
pneumatic connection and whenever the
electrical and pneumatic power supply
is restored, make sure that the machine
is in the configuration described below:
- pedal A COMPLETELY LOW (turntable
closed).
A
750
1000
750
8