8
7.0 TRANSPORT
The Tyre-Changer must be transported in its original packaging
The packaged machine has to be moved by mean of a fork lift of suitable capacity (500 kg min.). Please, insert the forks
as shown by the following picture “fig. 1”.
8.0 UNPACKING
Remove the protective cardboard, remove all fixing screw and free the Tyre-Changer from its original pallet.
Check the perfect condition of the machine, making sure that no part is damaged or missing, referring to the picture at
page 10.
If in doubt, please do not use the machine and get in touch with your Distributor for further steps.
Keep packing elements away from children.
All packing elements must be stored in the proper stocking areas.
Note: All the most delicate surfaces of the Tyre-Changer are coated by a special rust-proof oil.
Some oil traces may leak after coating procedure: please, remove them accordingly.
Lifting point
Gross weigth 455 Kg.
fig. 1
fig. 2
After tyre-Changer positioning, take of the lifting belt.
The machine must be moved by means of suitable capacity (fork-lift: 500 kg min. as per “fig. 1” or crane with liftin-
gbelt: 500 kg min. as per “fig. 2”).
Lifting point
After having positioned the machine, in its final location,
release the safety pin against accidental tilting of the arm
(fig. 3) Put the pin together with the other standard ac-
cessories delivered with the machine, for any future need.
Fig. 3