4
1.0 INTRODUCTION
Thank you for purchasing one of our Professional Tyre-Changer designed for demounting and mounting operations on
standard, UHP and “run-flat” tyres.
To prevent accidents or damages to the tyre-changer, use only recommended procedures and accessories.
1.1 Tyre-Changer data:
Please refer to “Tyre-Changer Model” and “Serial Number” data on the Data-Plate (see sample below) to provide our
Technical Service Dept. with the necessary details for prompt assistance and spare-parts tracking.
In case of discrepancies between Tyre-Changer data on Data-Plate and this Manual, please refer to Tyre-Changer dataplate
only.
1.2 Manufacturer data:
Please check the “Declarations of Conformity” at page 2 of this Manual and Tyre-Changer Data-Plate
1.3 Data-plate:
This Manual is part of this Tyre-Changer.
Use equipment only as described in this Manual.
Read and understand all instructions before operating this machine.
Keep this Manual in good conditions for further references.
Keep all instructions permanently with the unit.
2.0 GENERAL DESCRIPTION
The Tyre-Changer is intended for mounting and demounting most tyres with alloy or steel rim diameter from 12” to 30”
and standard, Run-Flat and UHP tyres with maximum diameter of 1.200 mm (47”).
The Tyre-Changer is NOT intended for demounting completely- or partially-inflated tyres, dirty tyres, nor for rim bending
or industrial wheels with split ring rims demounting.
All these operations are forbidden.
LOGO
Model