DAB1001 User Guide
19
FAQ
Please read this user manual carefully before using the DAB1001 In-Car DAB Adapter. If you
still have difficulties to use this unit, this section gives some of the most likely solutions to the
problems you might have.
I cannot find any DAB stations.
Ensure that DAB coverage exists in your area. Please visit www.worlddab.org or
www.digitalradionow.com to check for DAB coverage.
I can find DAB stations, but I cannot get any sound.
Make sure that the car radio is not on mute; check the volume settings of the car radio.
I forget the FM transmission frequency setting of DAB1001.
Press
SYNC
key the screen will show the current FM Transmitting frequency.
I cannot hear DAB program when I start up my car and turn on the car radio.
Ensure the DAB1001 is not in the Auxiliary mode.
While listening to a DAB station, I lost reception suddenly and hear static noise or a FM
program
1.
Check if DAB1001 station information shows
《
POOR SIG
》
or
《
UNAVAIL
》
, if so,
you may be leaving the signal coverage area. Also, the station may be unavailable
temporarily as you drive into a tunnel.
2.
If DAB1001 is in AFD mode, the FM transmitting frequency for DAB1001 and the car
radio listening Frequency maybe out of sync. To reset them, do the following:
Tune the car radio to FM frequency 87.6MHz.
Press and hold
PREVIOUS
to return the FM transmitting frequency to 87.6 MHz.
If DAB1001 is in AutoScan mode, the FM channel you selected for DAB mode may be
occupied by an existing radio station. You need to change the frequency settings of
FM Transmitter (refer to page 17).
