DAB1001 User Guide
11
Step Tune
Rotate the
Rotary Knob [◄] [►]
to step through the stations, one by one, until the screen
shows the desired station:
《
station name
》
.
Note:
When the DAB station you have selected is not available, the screen will show
《
UNAVAIL
》
. There will be no audio output from the DAB1001.
When the signal strength of the DAB station you have selected is too weak, the screen
will show
《
POOR SIG
》
.
Each time you start DAB1001, if the station list is empty, it will perform a Full Scan of
DAB stations automatically.
To Display Radio Text
DAB1001 is capable of receiving real time Dynamic Label Segment (DLS) station information
such as song titles, music type and news or traffic updates, or Dynamic Label Plus (DL+)
extended information for song track and song artist.
1.
While listening to a DAB station, press the
Rotary Knob
,
the station name display will
be replaced by the station text.
2.
If the feature is not enabled, the screen will show
《
TEXT OFF
》
. After a system time
out, the screen will revert back to station name.
To Set a DAB Mode
The DAB1001 provides memory positions for up to three sets of DAB Presets. The DAB mode
positions are: DAB1, DAB2, and DAB3. Each DAB Preset position has its own 4 Memory
Presets. This allows the user to setup three sets of four separate DAB Presets. These can be
used for different drivers, passengers or music choices.
1.
Press the
Rotary Knob
then
MODE
to enter mode function.
2.
Rotate the
Rotary Knob
[
◄] or [►]
to select a particular DAB Preset Mode.
3.
Press the
Rotary Knob
, the system will set the selected Preset mode. The screen will
then show
《
DONE
》
.
Note:
When you switch to a different DAB Preset Mode, the Memory Preset list of the selected
DAB Preset will be loaded into the internal operating system of the DAB1001
automatically. The DAB1001 will then perform all functions based on the settings of this
DAB Preset Mode.
The system default is
DAB1
.
To Save a DAB Memory Preset
You can save your favorite stations in the DAB Memory Preset List. There are 4 memory
presets.
1.
Rotate
the
Rotary Knob
[
◄] or [►]
to select a desired station.
2.
Press and hold
P1
,
P2
,
P3
or
P4
.
3.
The screen will display a short message of
《
P
X
SAVED
》
.
Note:
This new setting will overwrite a previous setting in Memory Preset
X
.
