background image

HEAT/LIGHT/VENT INSTRUCTIONS

Thank you for choosing CELSIUS. Your CELSIUS Bathroom Heat/Light/Vent has been
designed and manufactured to high standards of engineering. With proper use and care,
as described in this leaflet, you can expect years of service. Please read these
instructions carefully.

GENERAL CARE AND SAFETY GUIDE

Please read all instructions carefully before using your bathroom heater and
keep them for future reference.

This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience or knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their
safety
Children should be supervised to ensure they do not play with the appliance
Use only the voltage specified on the rating plate of the appliance
Do not cover or restrict airflow as the appliance may overheat and become a fire risk
Do not cover heat lamps, or inlet of airflow by placing these areas of the appliance against any
surface
Do not mount appliance close to any heat source
Do not operate in areas where petrol, paint or other flammable liquids are used or stored
Do not use the appliance to dry clothes
Do not insert or allow foreign objects to enter any point of the appliance, as this may cause an
electric shock, fire or damage to the appliance
Do not immerse in liquid or allow liquid to run into the interior of the appliance, as this could
create an electrical shock hazard
Do not operate after the appliance malfunctions, has been dropped/damaged in any manner.
Do not operate the appliance with wet hands
Use this appliance only as described in this manual. Any other use is not recommended by the
manufacturer may cause fire, electric shock or injury
Do not use this appliance in a window as rain may cause electric shock
Do not connect the appliance to the electrical supply until completely assembled
This appliance is intended for household use only and not for commercial or industrial use

Summary of Contents for CHL425W









Reviews: