AIR DRYING
Gently stretch the Electric Throw to its original size.
Air dry over a clothes line or shower rod. (DO NOT use clothes pegs or clips of any kind).
For throws with fixed controllers, ensure the cord is positioned so that water cannot flow into the
controller or switch.
DO NOT use the Electric Throw until it is completely dry.
MACHINE WASHING (THROWS WITH DETACHABLE CONTROLLERS ONLY)
Unplug and remove the Electric Throw controls.
Fold and presoak the Electric Throw for 15 minutes in a mild soap and lukewarm
water solution. Ensure the water temperature is less than 30
°
C.
Wash in mild soap and lukewarm water on the delicate or gentle cycle for 2
minutes.
Rinse in fresh lukewarm water.
MACHINE DRY (THROWS WITH DETACHABLE CONTROLLERS ONLY)
Place the throw into the dryer and tumble dry on low setting until damp. Approx
30 minutes.
Remove the throw while it is still damp and gently stretch to its original size.
Continue to air dry over a clothes line or shower rod.
(DO NOT use clothes pegs or clips of any
kind).
DO NOT USE IF MOIST OR WET
STORING YOUR ELECTRIC THROW
Always allow the Electric Throw to cool before folding and storing.
When not in use, roll or fold it loosely and store in a blanket bag or the bag it was supplied in.
Avoid creating sharp creases in the Electric Throw; for example do not store it under other items
that may result in bending the wires of the Electric Throw.
Care and Cleaning of your Electric Fleece Throw
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.
SUPPORT AND TECHNICAL ADVICE
Celsius
–
New Zealand
Monday
–
Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@celsius.co.nz
Celsius
–
Australia
Monday
–
Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@celsiusforhome.com.au
TECHNICAL SPECIFICATION
Model No:
CELMFT200
Supply:
220-240VAC 50Hz
Wattage:
100W
Summary of Contents for CELMFT200
