6.
Fix the top infill and shelf infill into place again with suitable mastic adhesive.
7.
Fit shelf into place ensuring it is correctly aligned with legs, mark the position of holes for
securing brackets on wall, remove shelf and drill wall and insert fixings in accordance with
Point 5, these brackets can be recessed if required. Fit the stub hearth in position between
the legs.
8.
Ensure that the surround components as shown below are mechanically secured as
indicated, this is required in accordance with the latest revision of
BS 1251 : 2015
Open Fireplace Components.
9.
Once the fireplace is correctly installed, grout all of the joints including between the
fireplace and the wall with a water based cream mastic or tile grout. Ensure all surplus
grout is immediately removed by washing the stonework using a sponge and clean water.
Page 9
