into light weight blockwork or friable aggregate blocks, the fixings shall be
of the resin anchor type.
6.
Fix the shelf top infill section and shelf infill into place again utilising the same procedure
as for the legs, i.e. mark positions, drill holes to suit, remove brackets and secure brackets
to wall with suitable fixings as detailed in Point 5.
7.
Fit shelf top section into place ensuring it is correctly centred, mark the position of holes for
securing brackets on wall, remove shelf and drill wall and insert fixings in accordance with
Point 5, these brackets can be recessed if required. Fit the stub hearth in position between
the legs.
8.
Ensure that the surround components as shown below are mechanically secured as
indicated, this is required in accordance with the latest revision of
BS 1251 : 2015
Open Fireplace Components.
9.
Once the fireplace is correctly installed, grout all of the joints including between the fireplace
and the wall with a water based cream mastic or tile grout. Ensure all surplus grout is
immediately removed by washing the stonework using a sponge and clean water
Page 11
