14
5.3. REMOVAL OF THE BLADE-COVER
1. LOOSEN THE KNOB OPPOSITE TO THE BLADE (see fig.9)
2. PUSH THE KNOB TOWARDS THE BLADE AND RELEASE THE BLADE- COVER FROM ITS
HOUSING. (see fig.10)
REMOVE THE BLADE-COVER FROM THE SLICER AND CLEAN IT WITH A WATER JET.
5.4. CLEANING THE BLADE AND RING
CLEANING THE BLADE AND RING IS A DANGEROUS OPERATION, HENCE, TAKE GREAT CARE
TO PREVENT ANY POSSIBILITY OF CUTTING.
FOR THEIR CLEANING NEVER USE A WATER JET, BUT USE A DAMP CLOTH AND
DETERGENTS, THEN RINSE AND DRY WITH A CLOTH.
FOR THE CLEANING, USE NON-TOXIC PRODUCTS WHICH GUARANTEE THE PERFECT
HYGIENE. CLEAN CAREFULLY THE BLADE EDGE AND THE INSIDE OF THE RING.
1. USE A DAMP CLOTH TO CLEAN THE OPENING BETWEEN THE BLADE AND RING. (see fig.11)
2. ROTATE MANUALLY THE BLADE AND CLEAN USING THE DAMP CLOTH.
5.5. REMOVING AND CLEANING THE SHARPENER HEAD
LOOSEN THE KNOB AS SHOWN IN FIGURE, LIFT THE HEAD AND THE SHARPENER UNIT,
AND REVOVE THESE UNITS BY LIFTING AND TURNING BY 180°. (see fig.12-13)
5.6. REASSEMBLING THE MACHINE
FOR THE MACHINE REASSEMBLY, REVERSE ALL THE ABOVE MENTIONED OPERATIONS.
