7.
Connect the DC end of the AC Power adapter to the DC power input
socket of the print server and the AC end to the wall outlet. This will
supply power to the print server, and the POST routines will proceed
automatically.
Note:
This print server is built with a default IP setting. To prevent from
any conflict in your network, it is recommended to use the PS Admin
program to change the IP setting when there is some other device’s IP
address is the same as the print server’s default IP.
If it is necessary to set up the wireless networking:
8.
Confirm that your wireless network is operating normally.
9.
Use the Web browser to configure the settings of your wireless network.
For the detail operation, please refer to the Web Configuration manual.
The default settings of wireless mode are:
♦
Connection Mode
: Infrastructure
♦
ESS-ID
: default
♦
Wireless Channel
: 11
