d. Switching Connection Mode
PicoPro allows you to easily switch from wired connection mode to wireless mode, and vice versa.
From HDMI mode to Miracast mode
1. From HDMI mode, press and hold "Mode Switch" button for about 2 seconds.
2. Celluon logo will display.
3. After the logo, “Preparing wireless connection… To go to HDMI mode, press Mode Switch button” screen will display.
4. After about 20-30 seconds, “Ready to Connect” screen will display for Miracast connection, indicating that the mode is successfully switched.
From Miracast mode to HDMI mode
1. From HDMI mode, press and hold "Mode Switch" button for about 2 seconds.
2. Celluon logo will display briefly, and "Please connect using HDMI cable or Press Mode Switch button to change to wireless mode" screen will display.
3. Use HDMI cable to connect device.
From Miracast mode to DLNA / DLNA mode to Miracast mode
1. From Miracast mode, lightly press “Mode Switch” button.
2. “Ready to Connect” screen for DLNA mode will display.
** Booting up time may take up to 3 seconds.
e. Reset Switch
Please use this switch to manually power off the product.
Lightly press the button with a sharp pin. (Please do not press and hold the switch for more than 3 seconds)
16
