background image

*

 

*

 

*

 

*

 

GUID

AR

APF5MCNE

W

www.interphone.com

Export Dept. [email protected]

Thank you for choosing our products.

Before using this product, we recommend you carefully perform the operations 

outlined in this Quick Guide.

Chapter 1 - Charging
Insert the recharging cable in the audio connector kit as shown in the figure.
Insert the other end of the cable in a standard USB port.

With the double jack 

you can charge two

Interphone MCs 

at the same time.

The LED lights up yellow/orange during charging.

The LED turns green when charging is complete.

When charging is complete, disconnect the units from the charger by pulling out 

the jack plug, and also unplug the charger from the outlet.

1a - Turning on for the first time (only with the double control unit version)

To turn on the device, press the MFB button (1) on both control units. The control 

units are pre-linked direct from the factory. When first switched on the two control 

units will go into standby mode (INTERCOM menu).

1b - Turning on for the first time (with the single control unit version)

To turn on the device, press the MFB button (1). Wait for the voice message in the 

correct language; confirm the language selection with a quick press of the MFB 

button (1).

The device will go into “PAIRING MODE“ at which point the following choices can 

be made:

- A short press of the MFB button (1) - telephone or GPS pairing.

- A short press of the UP button (2) - Interphone intercom pairing.

-  A short press of the DOWN button (3) - pairing with a third party intercom (ANYCOM).

-  A long press of the MFB button (1) until you a beep is heard - this cancels “PAIRING 

MODE“. The device goes into standby mode (INTERCOM menu) and the blue LED 

flashes slowly.

TURNING OFF

To turn off the device hold the MFB button the voice message “INTERPHONE POW-

ERING DOWN” is heard at which point the red LED will remain on.

Chapter 2 - Select your language (after turning the unit on for the first time):

With the F5MC in standby mode, go to the SETUP menu and select “LANGUAGE 

SELECTION”. Wait for the voice guide to speak in your language and then press the 

central MFB button (1) to confirm the selection.

If the WRONG language is selected then follow this procedure:

1.  Turn off the F5MC 

2.  Turn the F5MC on again

3.  Briefly press the UP button

4.  Briefly press the MFB button

5.  Briefly press the UP button

6.  When you hear the guide voice speak in your language press the MFB button.

Chapter 3 - Telephone or GPS pairing. Use one of the following procedures:

a)  With the F5MC turned off, press the central MFB button (1) for 5 seconds until 

the two red and blue LEDs flash alternately. Briefly press the central button again 

and turn on the Bluetooth® function on your telephone or GPS device. Search for 

new devices and select INTERPHONE.  

b)  With the F5MC in standby mode go to the SETUP menu. Select “PAIRING MODE” 

and press the central MFB button (1) until you hear a beep. Turn on the Bluetooth® 

function on your telephone or GPS device. Search for new devices and select IN-

TERPHONE.

Chapter 4 - Interphone Intercom pairing. Use one of the following procedures:

a)  With the F5MC turned off, press the central MFB button (1) for 5 seconds until 

the two red and blue LEDs flash alternately and then press the upper button. The 

device will begin to search for a second Interphone device.

   Make sure that the second Interphone device is in “PAIRING MODE“ (blue and red 

LEDs flashing alternately, as indicated in Chapter 3/b).

b)  With the F5MC in standby mode go to the SETUP menu. Select “INTERCOM DE-

VICE SEARCH” and press the central MFB button (1) until you hear a beep. The 

device will begin to search for a second Interphone device.

   Make sure that the second Interphone device is in “PAIRING MODE“ (blue and red 

LEDs flashing alternately, as indicated in Chapter 3/b).

   To activate or deactivate the connection press the central key on one of two 

F5MC devices.

   Repeat the same procedure to pair another unit and have a conference group.

Chapter 5 - Anycom - Third party intercom pairing. Use one of the following 

procedures:

a)  With the F5MC turned off, press the central MFB button (1) for 5 seconds until 

the two red and blue LEDs flash alternately and then press the lower button. The 

device will begin to search for a second NON Interphone device.

   On the second NON Interphone device activate the search for another tele-

phone; refer to the relative user manual if necessary.

   The F5MC begins to search for a second third-party device (NON Interphone de-

vice). 

b)  With the F5MC in standby mode go to the SETUP menu. Select “ANYCOM 

SEARCH” and press the central MFB button (1) until you hear a beep. The F5MC 

begins to search for a second third-party device (NON Interphone device).

   On the second NON Interphone device activate the search for another tele-

phone; refer to the relative user manual if necessary.

   Repeat the same procedure to pair another (NON Interphone ) device and have 

a conference group.

Chapter 6 - Pairing of 3 or 4 Interphone F5MC devices:

Pairing 3 F5MC devices:

 

B

C   

Pair A with B using the procedure described in Chapter 4.

Then pair B with C using the procedure described in Chapter 4.

To start a conversation press the central button of user B.

Pairing 4 F5MC devices:

 

B

C   

D

After having paired the three devices as described above, pair C with D using 
the procedure described in Chapter 4.
Start a conversation between three devices (ABC) then press the central but-
ton of user D to start add the forth user to the conversation.

*

 not included

AC 220/110 - USB ADAPTOR

EMERGENCY BATTERY

USB PORT

EQUIPMENT DISPOSAL INSTRUCTIONS FOR DOMESTIC USERS
(Applicable within the European Union and those countries with separate collection systems)
The marking shown on the product or its literature indicates that at the end of its life the 
product should not be disposed together with other household waste. To prevent possible 
harm to the environment or human health from uncontrolled waste disposal, please separate 
this from other types of wastes and recycle it responsibly to promote the sustainable reuse 
of material resources.

Domestic users are invited to contact the sales point where the product was purchased or the 
local office with information regarding recycling of this type of product. Business users should 
contact their supplier and check the terms and conditions of the purchase contract. This prod-
uct should not be mixed with other commercial waste for disposal purposes.
This product has an embedded, non-replaceable battery, do not attempt to open the product 
or remove the battery as this may cause injury and damage the product. When disposing of 
the product, please contact your local waste disposal service in order to remove the battery. 
The battery contained within the device and been designed to be used throughout the life 
cycle of the product.

This product is CE marked in accordance with the provisions of the R&TTE Directive (1999/5/
EC) and the RoHS Directive (2011/65/EU). With this CE mark Cellular Italy S.p.A. declares that 
this product complies with the essential requirements and other relevant provisions of the 
1999/5/EC and 2011/65/EU Directives. The user is forbidden to make changes or modifica-
tions of any kind to this device. Changes or modifications not expressly approved by Cellular 
Italy S.p.A. will void the user's authorisation to operate the device. Bluetooth® is a trademark 
owned by Bluetooth SIG, Inc.
For more information please visit the website: www.interphone.com 

Technical Specifications

Bluetooth® compliance:

Bluetooth® V.3.0 - Class II

Supported Bluetooth® profiles:

HFP

A2DP

AVRCP

Dimensions mm:

60x80x30

Weight:

44g

Range

Up to 10 metres

Talk time:

12h

Stand-by time

700h

Charging time:

3h

Battery type;

Rechargeable Li-ion

For the complete user manual please consult our website www.interphone.com

F5MC 

V

OICE MENU DIA

GR

AM

pr

ess the MFB butt

on t

o c

onnec

t A and B

to c

onnec

t A pr

ess the butt

on un

til y

ou hear a beep

to c

onnec

t B pr

ess the butt

on un

til y

ou hear a beep

press un

til you hear the beep 

to c

onfirm

use the arrow

s to scr

oll through the menu and use the c

entr

al button t

o select

pr

ess un

til the beep t

o pla

y/pause

pr

ess t

o selec

t tr

ack

pr

ess up butt

on un

til the beep t

o shar

e

pr

ess t

o sear

ch

to selec

t memor

ised sta

tions pr

ess un

til a beep is hear

d

pr

ess t

o memor

ise sta

tions

pr

ess t

o r

e-

dial

pr

ess t

o v

oic

e dial

INTERC

OM

PHONE

FM R

ADIO

MUSIC STREA

MING

AUXILIAR

Y INPUT

SE

T UP

RDS

 on/off

C

ALL

 ID

 on/off

FULLF

A

CE

 HELME

T/

JE

T HELME

T/

A

UT

OM

ATIC

 VOL

UME

 C

ONTROL

 off

VOICE

 ANSWER

 on/off

ER

ASE

 P

AIRINGS

full/limit

ed

 VOC

AL

 HELP

AN

YC

OM

 SEARCH

INTERC

OM

 DE

VICE

 SEARCH

PAIRING

 MODE

LANGU

A

GE

 SELEC

TION

Reviews: