manualshive.com logo in svg

Cellphone-Mate SureCall CM800 65dB, User Manual

Share
Download
Cellphone-Mate SureCall CM800 65dB User Manual Download Page 5

                      Cellphone-Mate Inc. 
                        CM800 Manual 

 

5

 

 

 

 

Amplifier Gain Control   

                                                                                                                                               

Each Attenuation Gain Switches control a certain level of gain. Each button has a certain dB gain, which is on the top of the amplifier. 

Those values are 16, 8, 4, 2, and 1 for the five switches respectively. 

 

TROUBLESHOOTING GUIDE                                                                                                                                         

 

During operation, if the Amplifier interferes with your radio or other electronic receivers, move the Amplifier further away from those 

devices.  

                 

For a list of Frequently Asked Questions and a complete and up-to-date Troubleshooting Guide, please visit our website at: 

 

www.Cellphone-Mate.com/FAQ.htm 

 

You can also consult a Cellphone-Mate technical specialist directly by sending e-mail to us at: 

[email protected]  

 

Or write to:

 

Cellphone-Mate, Inc. 

2140 Peralta Blvd. Suite 213-A 

Fremont, CA, 94536 U.S.A.

 

 

 

 

 

 

Mounting Rig 

Summary of Contents for SureCall CM800 65dB







Reviews:

No comments

Brands by name

Popular brands

Load more brands