Cellphone-Mate Inc.
CM800 Manual
4
1. The input voltage for the Amplifier is 9V. DO NOT use this Amplifier with a regular 12V power supply. If a 12-volt
power supply is connected directly to this Amplifier, it will be damaged.
2. Never plug in the power supply to the amplifier without the outdoor antenna and indoor antenna cables having been
attached to the amplifier.
3. Ensure that the distance between inside and outside antennas is a minimum of 75 feet for the amplifier.
4. If the Uplink Full light or Uplink Half Light is on when you are not making cellular phone calls, DO NOT use the amplifier,
turn it off immediately, since it may cause damage to the amplifier.
Downlink Full Light
Downlink Half Light
Power Light
Power Cord
Downlink Gain Control Switches
Uplink Full Light
Uplink Half Light
Power Light
Uplink Gain
Control Switches
N Connector for Indoor
N Connector For Outdoor
