Cello F4020FR, User Manual

Page: 20 / 31

17
Network Menu
You have a few options when connecting your TV to the internet.
a. You can connect your TV to your router directly by connecting a Ethernet cable (wired connection) to your TV .
b. You can connect wirelessly via Wi-Fi.
Equipment Control Menu
If you have soundbars or Receivers, you can connect them to your TV, they can then be setup in the Equipment Control Menu.
Alexa can then also contol the connected device too, please be patient as this process may take a while.
1. Select and access Add Equipment.
2. Select SOUNDBAR or RECEIVER that you want to connect then press SELECT
.
3. Select the brand of your Sound bar.
4. Make sure your Soundbar is switched on and the volume is up then press SELECT.
5. Press STANDBY on your TV remote control, wait 10 seconds then press the STANDBY button again.
6. You'll now be asked 'Did your soundbar turn off and then back on when you pressed STANDBY' . If it did highlight YES and press
SELECT, if it didn't highlight NO and press SELECT. You may need to repeat this process multiple times.
If TV is not connected to the Internet, you could find all the available networks and you can set your network here.
If TV is connected, it will show Connected under the Network name. The Signal Strength and Security of the connection is
displayed on the right of the screen.
Press the button to forget the network
.
Seeing All Networks
You'll now see a list of all available networks.
Joining a Network Using WPS (Button) or (PIN)
If you do not remember your Wi-Fi password, please use the WPS option this temporarily disables your routers password and allows you to
connect to it without it.
Advanced Network Settings
Select JOIN OTHER NETWORK and manually type in your desired network settings with on-screen keyboard.
Saving your WiFi Password to your Amazon Account
Switch Saving your WiFi Password to your Amazon Account to on . Then you can save your Wi-Fi Password to your Amazon
account, this could help you to connect your other device to the same network.
7. When your Soundbar eventually turns off and on, you will be asked to press the VOLUME UP and DOWN buttons. Press the
and - buttons.
8. If your volume level adjusted as expected select YES and press SELECT. If not select NO and continue until the volume
level changes.
9. Your Fire TV remote has now been setup, it will now switch your sound bar on and off and adjust the volume level.