1
Adapter and LAN cable are not included in the package.
C a m P i l ot M R H 1 0 0
IP BOX Camera
User Manual
Before installing and using the product, please read
this manual carefully.
Be sure to keep it handy for later reference.
Detail Model Name
MRH100 - CP11MV - TDN5
D
ig
it
a
l
D
N
A
m
a
k
e
s
y
o
u
D
IV
A
(Lens are sold separately)
2
Precaution
WARNING
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTIONS
■ Do not open or modify
Do not open the case, as it may be dangerous and cause damages.
■ Do not put objects inside the unit
Make sure that no metal objects or flammable substances get inside the camera. It could cause
fire, short-circuits or damages.
■ Be careful when handling the unit.
To prevent damage, do not drop the camera or subject it to strong shock or vibration.
■ Install away from electric or magnetic fields.
■ Protect from humidity, dust and high temperature.
CamPilot MRH100 is for indoor use and vulnerable to water and/or moisture.
An additional case that is temperature-controllable, damp-proof and waterproof is required for
outdoor use.
■ Cleaning
Dirt can be removed from the case only by wiping it with a soft cloth moistened with a soft
detergent solution.
■ Mounting Surface
The mounting surface material must be strong enough to support the camera.
■ CamPilot MRH100 can be used for surveillance purpose.
Be thoroughly informed of related regulations prior to installation to ensure compliance with such
regulations.
3
Overview
Features
CamPilot MRH100 is an IP Camera that transmits real-time high-resolution digital video
and audio data with H.264 high compression rate over Internet or Intranet.
CamPilot MRH100 contains digital video/audio compressor, web server and network
interface. Users can simply connect power source and network cable for operation.
Additional operation equipments or programs are not required.
Appearance and Accessories
GND
1. D OUT / D IN (Digital Output/Input)
2. PWR (Power Supply LED)
3. VIDEO (BNC connector for video test)
4. D.T (Default Switch, Reset to the initial network setting)
5. RS485 (Pan/Tilt Control)
6. LAN/PoE (10/100 Base-T LAN & PoE support)
7. AUDIO IN/OUT (Ø3.5 stereo jack)
- L : Audio IN (Mono)
- R : Audio OUT (Mono)
- White-MIC / Red-SPK
8. AC/DC 24/12 (DC12V 1A (Ignore the polarity)
or AC24V 0.6A)
C/CS mount ring
▶ Top
▶ Side
▶ Rear
DC Iris
connector
▶ Front
Audio cable
DIO Cable
DC Iris Connector
1. control –
2. c
3. drive +
4. GND
IRIS PIN No.
62mm
55mm
133mm
4
Specification
Items
CamPilot MRH100-CP11MV
Camera
Device
OmniVision CMOS
Size
1/4 inch
Effective Pixels
1280 x 720 pixels
Min. Illumination
3300mV / (Lux • sec)
Lens Mount
C / CS Mount Lens Support
Auto Iris Control
DC Iris Lens Support
IR Cut Filter Remove
TDN5
White Balance
AWB mode
S/N Ratio
39dB
Encoder
CPU
ARM9
Flash Memory
8MB
RAM
DDR2, 256MB
OS
Embedded Linux
Video Output
1ch. loop-throughout (BNC connector)
Audio Input / Output
1ch. in / 1ch. out (Ø 3.5mm stereo jack - RCA)
Image
Size
NTSC : 720p(1280X720), D1(720X480), 4CIF(704X480), VGA(640x480),
CIF(352x240), QVGA (320x240), QCIF(176x112), QQVGA(160x112)
PAL : 720p(1280X720), D1(720X576), 4CIF(704X576), VGA(640x480),
CIF(352x288), QVGA (320x240), QCIF(176x144), QQVGA(160x112)
Codec
H.264, MJPEG
Bandwidth
32Kb~4Mb
Transmission
Up to 30fps (at 720p)
Network
Interface
RJ45 (10/100 Base-T)
Connection
Up to 10
Protocol
TCP/IP, ICMP, HTTP, ARP, SMTP, FTP, PPP, PPPoE, DHCP, NTP, SNMP, UPnP
RTP, RTSP
Firmware Update
Available on Web browser
Security
Password Authentication
O
User Authentication
O
DIO (Digital Input / Output)
1 in / 1 out
Pan / Tilt / Zoom
RS-485
Motion Detection
O
Dynamic IP support
O (DHCP, PPPoE support)
Recording
PC software
FTP, Email Transmission
O
Power
PoE support, DC 12V 1A / AC24V 1A (sold separately)
