Cellini CSR200, User Manual, Page: 7 / 15

6

IRONING TIPS
·
Always check first whether a label with ironing instructions is attached to the article.
（refer to the table below for direction.）Follow these ironing instructions in any case.
·
If no ironing-instruction label is provided, but you know the fabric material, please
refer to the table below for direction.
·
The table below is not applicable to those fabrics through special treatment（e.g.
shining, frill, projecting etc.）.Use low temperature to iron particular fabrics.
·
Always at first divide the clothes according to ironing temperatures. Woolen fabrics
and cotton fabrics etc. should be ironed separately.
·
The iron heats up quicker than cooling it down, therefore, you should start ironing the
articles requiring the lowest temperature such as those made of synthetic fiber.
·
If the fabric consists of various kinds of fibers, you must always select the lowest
ironing temperature to iron the composition of those fibers. If you don’t know what kinds
of fiber the fabric is made of, choose one piece that can not be seen easily to find out
the best ironing temperature.（start from low temperature until the most suitable
temperature is obtained）
·
Pure wool fabrics (100% wool) may be ironed with the iron set to a steam position.
Preferably set steam knob to the maximum position and set the temperature dial to
moderate setting or high setting and use a dry cloth as a mat.
·
Velvet and other textures that rapidly become shiny should be ironed in one direction
with light pressure applied. Always keep the iron moving at any moment.
·
Silk and other fabrics that are likely to become shiny should be ironed on the inner
side. To prevent staining, do not spray water straight on silk or other delicate fabrics