4
to take your appliance
Reverse the assembly procedure to take the appliance apart.
Always unplug after use
to use your blender
You can use your Blender for making delicious and nutritious cold drinks.
assembly and use
Place the Glass jug on the motor drive coupling.
Place the tops of the Clamps on the respective slots on the Glass jug, leaving the
Clamp Hinges resting out. Press the bottom of the Clamps in, until they snap snugly
into place.
Place the liquid ingredients into the Glass jug.
Fit the Blender lid and the little cup.
Switch on and speed setting(P = Pulse, 1 = Low, 2 = High).
cleaning
Before cleaning, unplug your appliance.
We don’t recommend washing any of the parts in the dishwasher.
Body unit
Wipe with a damp cloth, then dry.
Juicer
If the filter basket is too tight to remove, wait a few minutes until it loosens up.
Some foods, eg carrot, will discolour the plastic. Rubbing with a cloth dipped in vegeta-
ble oil helps remove discolouring.
Juice Collector, Juicer Cover, Pusher
Wash, then dry.
Filter Basket
Clean using a soft brush.
Check the filter regularly for signs of damage. Do not use if the filter is damaged.
other parts
Wash in hot soapy water, then dry.
Blender
blender unit
Before dismantling the blender, half fill the glass jug with warm water. Fit the blender
lid and little cup then place on the motor drive coupling. Switch to 2 and whilst running,
This can be repeated until the water runs clear.
Blender lid, little cup
Wash by hand, rinse with clean water then dry.