PREPARING THE ULTRAMIST
™
SYSTEM
Allow the saline to run through the applicator tubing until
saline is noted at the distal tip. Close the tubing clamp.
10
If utilizing the adjustable hook, position generator near the
edge of a flat work surface (i.e. tabletop or cart). Extend
the hook beyond the edge and attach the saline bag.
Adjust position as necessary so the saline bag hangs freely
and the generator is stable.
11
The display screen will ask for the saline pump to be
loaded. Open the saline pump door.
12
Loop the applicator tubing from the saline bag through
the saline pump from left to right, center on tubing
guides, and close the pump door. Leave enough tubing
to allow the saline bag to hang freely with the majority of
the tubing between the pump and treatment wand.
13
Open the tubing clamp. Saline will not flow until the
treatment on/off button is initiated.
14
The system is now set up and ready for treatment.
Note: Saline will only flow in conjunction with ultrasound
delivery.
-- Total Treatment Time
Number of --
Wounds
-- Treatment Time
for Wound 1
PL-61044_B
4
Remove saline bag from outer packaging. Remove the
protective cover from applicator tubing spike and from
saline bag port. Insert spike fully into saline bag.
9
Insert applicator tubing into the treatment wand tubing
channel and attach the tubing clip to the treatment wand
cable. Place treatment wand in cradle once completed.
8
ULTRAMIST
™
SYSTEM
INSTRUCTIONS FOR USE
Tubing Guides