background image

                                                       

 

                       

 

- 33 -

Warranty  

 
 

Thank you for choosing an Apex cooling unit. 

 
Please enter the complete model and serial numbers in the space provided: 

 
Model_________________________________________________________ 
Serial No.______________________________________________________ 

 
Attach your purchase receipt to this owner’s manual. 
 
 

1.  Limited Warranty 

         
 
APEX warrants its products, parts only, to be free from defects due to 
workmanship or materials under normal use and service for twelve months after 
the initial sale. If the product is defective due to workmanship or materials, is 
removed within twelve months of the initial sale and is returned to APEX, in the 
original shipping carton, shipping prepaid, APEX will at its option, repair or 
replace the product free of charge.  
 
This warranty constitutes the entire warranty of the APEX with respect to its 
products and is in lieu of all other warranties, express or implied, including any of 
fitness for a particular purpose. In no event shall APEX be responsible for any 
consequential damages what is so ever. Any modification of APEX products shall 
void this warranty. 
 
 

Service under Warranty 

 
This service is provided to customers within the continental UNITED STATES 
only. APEX cooling units are warranted to produce the stated number of BTU/H. 
While every effort has been made to provide accurate guidelines, APEX can not 
warranty its units to cool a particular enclosure. 
             
In case of failure, APEX cooling units must be repaired by the factory or its 
authorized agent. Repairs or modifications made by anyone else will void the 
warranty. 
             
Shall an APEX cooling unit fail, contact the dealer for instructions, do not return 
the unit to the factory without authorization from APEX. If the unit requires repair, 
re-pack it in the original shipping carton and return it to the factory, shipping 
prepaid. APEX will not accept COD shipments. If the unit is determined to be 
faulty and is within the twelve month warranty period APEX will, at its discretion, 

Summary of Contents for CT12TSD




































Reviews: